http://natsupport.help-out.net/feed/? Latest topics Tue, 16 Sep 2008 00:28:52 GMT 10 http://illiweb.com//fa/punbb//vide.gif http://natsupport.help-out.net/feed/? http://natsupport.help-out.net/tech-support-f3/thaggles-walkthrough-t7.htm Sight First off, I haven't read on bungie HOW to open your NAT, but chances are they aren't as good as it as I may think, but I am going to go in depth with how to do it. DMZ Hosting DMZ Hosting opens ALL ports on a given device. Similar to portforwarding, but opens ALL ports. Not advised for use on a computer. First, this is only for those who go through a MODEM and a ROUTER. You need to access your router first, but must know your modem's IP Address (internal). portforward.com will ... Tech support Thu, 11 Sep 2008 11:44:10 GMT http://natsupport.help-out.net/tech-support-f3/thaggles-walkthrough-t7.htm#14 http://natsupport.help-out.net/tech-support-f3/thaggles-walkthrough-t7.htm http://natsupport.help-out.net/complete-off-topic-f1/sight-click-here-t10.htm Anonymous Do you like the small changes I have made to the appearance and the order of the boards and such? And it says that the forum is closed so I don't think anybody else can join :/ Complete Off-Topic Tue, 16 Sep 2008 00:28:52 GMT http://natsupport.help-out.net/complete-off-topic-f1/sight-click-here-t10.htm#22 http://natsupport.help-out.net/complete-off-topic-f1/sight-click-here-t10.htm http://natsupport.help-out.net/tech-support-f3/walkthrough-for-linksys-wrt54g-series-routers-t8.htm Sight Before I go any further let me begin by HIGHLY recommending that you upgrade the routers firmware. Not only is it relatively painless to accomplish but it will definantly save any heartaches in the future. To do this click here and follow the instructions. These instructions are for Linksys WRT54G, and WRT54GS routers, all versions, assuming your firmware is upgraded. All three methods of opening your NAT will require that you access the routers setup page. To do this, open a new ... Tech support Thu, 11 Sep 2008 11:44:59 GMT http://natsupport.help-out.net/tech-support-f3/walkthrough-for-linksys-wrt54g-series-routers-t8.htm#15 http://natsupport.help-out.net/tech-support-f3/walkthrough-for-linksys-wrt54g-series-routers-t8.htm http://natsupport.help-out.net/tech-support-f3/sight-s-walkthrough-t6.htm Sight Note: This guide is not totally complete, there are some things I need to switch around, and maybe add, like router firmware and a walkthrough for people without a router. This guide is safe if you follow instructions, but if you mess up that is what the reset button is for. Part 1 For people with a router and a modem, your 360 and computer must be using the same router. 2 things, when your plugged directly into your modem, your default gateway is your modems address. When your ... Tech support Thu, 11 Sep 2008 11:43:12 GMT http://natsupport.help-out.net/tech-support-f3/sight-s-walkthrough-t6.htm#13 http://natsupport.help-out.net/tech-support-f3/sight-s-walkthrough-t6.htm http://natsupport.help-out.net/tech-support-f3/another-place-for-help-t2.htm Anonymous

-Thaggles]]> Tech support Wed, 10 Sep 2008 06:39:55 GMT http://natsupport.help-out.net/tech-support-f3/another-place-for-help-t2.htm#2 http://natsupport.help-out.net/tech-support-f3/another-place-for-help-t2.htm